Lunamoon Shimmer Gel №7 30ml

Classic glitter extension gel Shimmer Gel is a polymer light-curing material that, due to its strength, allows you to significantly lengthen the nail plate. It contains photoinitiators that start the polymerization process when the material is exposed to ultraviolet light of a certain wavelength.

Features:

• It is acid-free.
• It is shock-absorbing and does not crack during impacts.
• It has a medium consistency.
• Has medium pigmentation, covers the free edge.
• Suitable for the technique of ‘building without filing’.
• Suitable for building on top of the top shapes.
• Does not cause burning in the lamp.
• It becomes thicker in the cold and thinner in the heat.
• Thixotropic - it becomes thinner if you move the brush during work.
• It can be further heated to make the gel thinner.
• Hard at a thickness of 1 mm. If the thickness is less than 1 mm, it can bend slightly, but this does not affect the wearing experience.
• Does not shrink and holds the arch well.
• Requires a Rubber Base underlayment.
• The wavelength for polymerisation is 380-420 nm.
• The power of the UV/Led lamp is 36-48W.
• Permissible coating thickness: 0.5 mm at the end/ 1 mm at the apex.
• Complete polymerisation 120 seconds.

Application method:

STRENGTHENING

1. Removal.
2. Do not file the shape of the nail or leave 2 mm in length, which will be removed after levelling.
3. File the nail with a 220 grit file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If we work with removers, wash our hands with soap and water after working with them.
6. Degrease the nail with Nail Prep LUNAmoon. We make two approaches. Use 4 napkins (1 napkin for 5 fingers). First approach: wipe the surface of the nail. The second approach: take an orange stick, put a napkin on it, and wipe everything in the cuticle area and sinuses.
7. We can use a primer if we wish, but if the base for the substrate is sufficiently acidic, it is not needed.
8. The Rubber Base LUNAmoon is best applied with a flat gel brush. The movements should be rubbing. Draw all the sinuses of the nail and dry in the lamp for 60 seconds.
9. Remove the stickiness.
10. Levelling. If you are levelling with gel, indent the cuticle 0.5-1 mm. Dry in the lamp for 60 seconds.
11. File the shape after you have levelled it. This is necessary to create a thickness at the edge of the nail that will hold the free edge.
12. If the nail is thin, it can curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no peeling of the material. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material at the free edge.
13. After filing, remove the stickiness and cover with gel polish.
14. Cover with a top. Dry for 120 seconds. After drying, do not wipe with anything, as the shine may be lost.

CLASSIC EXTENSION

1. Removal.
2. Shorten the length of the nail to 1 mm and make a round shape.
3. File the nail without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit file.
4. Do a manicure.
5. If we work with removers, wash our hands with soap and water after working with them.
6. Degrease the nail with Nail Prep LUNAmoon. We make two approaches. Use 4 napkins (1 napkin for 5 fingers). First approach: wipe the surface of the nail. The second approach: take an orange stick, put a napkin on it, and wipe everything in the cuticle area and sinuses.
7. We use the LUNAmoon primer.
8. The Rubber Base LUNAmoon is best applied with a flat gel brush. The movements should be rubbing. Draw all the sinuses of the nail and dry in the lamp for 60 seconds.
9. Remove the stickiness.
10. Set up a form for building up the free edge of the nail.
11. Lay out the shape of the artificial nail with a transparent gel. Dry for 30 seconds.
12. File the free edge and give the nail the desired shape.
13. Wipe off the stickiness and excess dust.
14. Pass the Rubber Base LUNAmoon over the areas where the file was used one more time. Dry for 30 seconds.
15. Level it with the gel, put it in the lamp, and hold it for 10-15 seconds. If the gel has a strong stickiness or contains glitter, hold it for 20 seconds.
16. Dry in the lamp for 120 seconds.
17. Remove the stickiness before covering with gel polish.
18. Cover with a top. Dry for 120 seconds. After drying, do not wipe with anything, as the shine may be lost.

TPO FREE

(Product photos on the website may differ from the actual product)