Lunamoon Stained glass Builder Gel №8, 15ml

Please note: Product color may differ slightly from what you see on your screen due to lighting and display settings.

Lunamoon Glass Builder Gel is a light-curing polymer material for strengthening and extending nails. Its stained-glass effect allows for the creation of a transparent color coating with depth and a glass-like effect.

Color intensity can be varied depending on layer thickness: in a thin layer, it creates a transparent veil; in a thickness of up to 2 mm, the color is more pronounced but retains a transparent glass-like effect.

Features:

– Acid-free.
– Medium consistency, closer to thinner.
– Non-viscous, easy to pick up and apply with a brush.
– Self-leveling properties.
– Evenly distributed over the nail plate.
– Does not run during application.
– Light consistency reduces the risk of air bubbles during application.
– Suitable for strengthening the nail plate.
– Suitable for the no-file extension technique.
– Suitable for building up top nails.
– Provides cushioning and does not crack upon impact.
– Thickens in cold weather and becomes less dense in warm weather.
– Can be reheated to thin out the consistency.
– Does not cause a strong burning sensation in the lamp.

Important:

– A Rubber Base base is required.
– The free edge thickness must be at least 1 mm.
– Pre-cure with a flashlight for 10-15 seconds, depending on the lamp power.
– Recommended wavelength for polymerization: 365-405 nm.
– Recommended UV/LED lamp power: 36-48 W.
– Maximum material thickness in one polymerization step: up to 2 mm. – Full cure – 120 seconds.
– If the material thickness is greater than 3 mm, we recommend working in two stages with intermediate curing.

Application Method

STRENGTHENING

1. Remove the pre-coat.
2. Do not dust the nail shape, or leave it up to 2 mm long, which will be removed after smoothing.
3. Use a 220-grit file to dust the nail without applying too much pressure, lifting the scales of the nail plate, or use a 100-grit buff.
4. Perform your manicure.
5. If using removers, wash your hands with soap after handling.
6. Degrease the nail with Nail Prep LUNAmoon in two stages. Use 4 wipes: 1 wipe for every 5 fingers. First stage: wipe the nail surface. Second approach: Place a napkin over an orange stick and thoroughly wipe the cuticle area and nail beds.
7. Use a primer if desired. If the base coat is sufficiently acidic, a primer is not required.
8. It's best to apply the LUNAmoon Rubber Base liner with a flat gel brush using a rubbing motion. Apply it to all the nail beds and cure for 60 seconds.
9. Remove the sticky layer.
10. Smooth out the Glass Gel, leaving a 0.5-1 mm margin from the cuticle. Cure for 120 seconds.
11. After smoothing, file the shape. This is necessary to create a thickness at the edge of the nail that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file off 1 mm of the natural nail from the inside. This will prevent the material from peeling off. If the material is hard and the nail is very soft, the nail itself may begin to separate from the hard material at the free edge.
13. After filing, remove the tacky layer and dust.
14. Apply gel polish if necessary.
15. Apply a top coat without a tacky layer. Dry for 120 seconds. After drying, do not wipe to maintain shine.

CLASSIC NAIL EXTENSION

1. Remove the top coat.
2. Trim the nail to 1 mm and shape it into a round shape.
3. Use a 220-grit file to lightly dust the nail, lifting the scales of the nail plate, or use a 100-grit buff.
4. Perform your manicure.
5. If working with removers, wash your hands with soap after use. 6. Degrease the nail with Nail Prep LUNAmoon in two passes. Use 4 wipes: 1 wipe per 5 fingers. Pass one: wipe the nail surface. Pass two: place the wipe on an orange stick and thoroughly wipe the cuticle area and nail beds.
7. Apply LUNAmoon primer.
8. Apply LUNAmoon Rubber Base liner, best with a flat gel brush, using a rubbing motion. Apply to all nail beds and cure in the lamp for 60 seconds.
9. Remove the sticky layer.
10. Attach the free edge extension form.
11. Place the Glass Gel artificial nail form. Cure in the lamp for 30 seconds.
12. File the free edge and shape the nail.
13. Remove the sticky layer and remove dust.
14. Reapply Rubber Base LUNAmoon to the areas where the saw was used. Cure for 60 seconds.
15. Level the Glass Gel, place it in the lamp, and clamp it for 10-15 seconds. If the material is more sticky, clamp it for 20 seconds.
16. Cure in the lamp for another 120 seconds.
17. Remove the sticky layer before applying gel polish.
18. Apply gel polish if necessary.
19. Apply a top coat without the sticky layer. Cure for 120 seconds. After drying, do not apply anyRub to maintain shine.

INGREDIENTS INCI: Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate.
May contain: CI 77499, CI 77891, CI 15850, CI 19140, CI 77510.

Shelf life: 24 months. Store opened for no more than 18 months.

TPO FREE